Everything looks good ewolff except the 3DM01. There is no published file to review.
1. Copy and paste the whole post to a Word.doc so you don't lose it. Use that as a template for all future -*test*-('")s (justa convenience thing).
2. Run 3D01 again and see what it says. I am not sure what it is reporting there. Very odd.
3. Leave this thread as is and when you get the damn 01 to work, cut and paste over the scores and we will get you set up.

Paul, that is the FINAL time I nit pick you! Thanks M8. Your in the show now.

I tried it again Merc. Still will not let me publish it. Could it because of the Dual core? I have the screen shot of the -*test*-('")..but that will do us little good. I am heading out to Compusa to look at some software right now, but when I get back, I will tinker with 3d01.

Right now the only thing I can think of so you can verify the -*test*-('") is I give you the password to that account. I am not concerned if you access that account. It's only for -*test*-('")ing. I will see what I can do this afternoon.

ewolff7

This is usually only an issue with very high overclocks.
I have only encountered this when pushin my cpu's to their absolute limit.
3dmark detects the instability as a cpu speed change during the -*test*-('")s.
Such as if one changed the cpu speed with clockgen in between running them.
Very odd that you would have this problem running at stock speeds for sure.

This might be a silly question.....but you do have cool n quiet disabled in the bios right?

No... I have it enabled. Is that a problem?

If so let me know and I can tinker with the BIOS settings.

ewolff7

Not sure what is what between the 2 of you but this is makin my head hurt. If you have CnQ enabled disable it. Its counterproductive to run any bench with it let alone a OC of the rig. Hope I have not added to the mass confusion that is rampant atm.

Well... I disabled it, along with Q fan control, and a whole host of other stuff. Still wont let me publish the results. I put in a request with Future Mark to see what they say.

ewolff7

ewolff, C&Q is Satans spawn IMHO

Even though you aren't overclocking, the instability that C&Q causes willreally screw up a 32 board. The 32 is already screwed up power-wiise.

Reset the CMOS/BIOS, then go into BIOS and disable legacy USB . Find APM and enable it but disable everything in its sub-menu.

Disable/remove every Asus or AMD overclocking utility and then set the rest to auto and rebench bloody 3D01.
We'll deal with the rest later but just get that bench "published". Great scores BTW

ewolff
Re-install 3D01 and try again. if that doesn't work, take a screenshot and we will submit that. The important thing right now is to get you on the data base.

Well, I got it to post. I hurt my score a little, but it published. Hereis everything again.

ewolff7
3d01
25068
http://service.futuremark.com/compare?2k1=9001513

3d03
32589
http://service.futuremark.com/compare?2k3=4844843

3d05
12092
http://service.futuremark.com/compare?3dm05=2082725

3d06
7875
http://service.futuremark.com/compare?3dm06=357431

Crystalmark 9
http://crystalmark.info/CrystalMark/09en/r...ng.php?ID=60376

ALU 16510
FPU 19092
Mem 10479
HDD 8183

Total 103060

Hope I did that right.

ewolff7

Looks good ewollf, your in the show!

Machine #2: (Betsey's Rig)

3d01
17947
http://service.futuremark.com/compare?2k1=9001523

3d03
19830
http://service.futuremark.com/compare?2k3=4847280

3d05
9441
http://service.futuremark.com/compare?3dm05=2085583

3d06
4092
http://service.futuremark.com/compare?3dm06=360205

Crystalmark 9
http://crystalmark.info/CrystalMark/09en/r...ng.php?ID=60520
ALU 9556
FPU 11282
Mem 8045
HDD 6625

Total 67930

FX-55
2 G 3200
2 x 6800GS
1 HD
No Overclock (stock 13x200)
Single Core
Dual GPU

VERIFIED - MERC

Thanks Arlie for the extra effort!

That would be, "Thanks Betsey" for giving up the rig for an hour and a half so I could install and run. Thank you's can go to tkharmony@yahoo.com.

The downside is that, now that she's seen the difference between a single and dual core, she wants her own dual core. This may have been a very expensive little adventure.

Ok... we've extended the player entry deadline til the 30th due to all the requests from all the forums...
If you have any additional players wanting to play, enter them into the database with system spec and Zeros (no scores)
From July 1st to the 10th have all entry's with zeros post any score (must be a fresh score- no old scores)
The deadline for upgrades and Team roster submissions is also the 10th of July.
this is your chance to round out your teams and add second systems...
hurry the new deadline for player entries is June 30th at the la-*test*-('")...

Get'er done and good luck
Ray