I just shut down, unplugged the IDE, rebooted fine off the SATA, shut down again, plugged the IDE in, and it fired up just fine. I didnt see and option for SATA\IDE boot sequence, just HD, CDROM, Removeable and so forth.

Mark

Ok, everything seems quite stable, CPU temp at 34C, guess I should get the side panel back on, see what that does, then jump to the overclocking place and try to get it to 3.0Ghz safetly

Thanks again for all the info Fellas, you've all been a great help!!

Mark

Sounds like the system figured it out itself. Usually the HArd Drive Boot Order will come up when you have more than one drive installed and sits below the other boot order section in BIOS. IF it is booting of the SATA now then it is fine. COngrats and good luck with the Overclock