No problem. The links probably do work for you. I had the sanme problem. I could see my scores/links but Roderick couldn't. The solution was as outlined above.

OK, my first update. I have tinkered with the memory timings and voltage with no luck. I'm pretty sure it has to do with setting the sb to k8 and sb to nb, but I don't know enough to start changing those around. Maybe someone could suggest a combination that would most likely work for my rig? I'm opened to suggestions.

0uestion: OK, I'm pretty sure I can't, but just verfying it. Can I have a different FSB setting for different runs? For example, 3d05 will freeze with the FSB set at 203, where as 3d03 and 3d06 will run. I figure we have to run all programs at the same cpu multiplier and FSB being as thats what we are required to post at the bottom of our updates? Just verifying.

You can run whatever settings you want for any -*test*-('"). Settings do not have to be the same. Set it up to the best for each -*test*-('") and let it go.

SB to NB should stay at 1000 by setting it at 5x 200. No benefit at all from changing that. K8 to NB should be at or below 1000 I believe.

Another update. I finally got over 10,000 in 3d06. I think I'm about at the end of the line here. Unless someone has got a suggestion for me?

JaxMacFL
Not sure if you have already seen this or not .
But it goes over some of the settings you are asking about.
http://www.nforcershq.com/forum/a8n32-quic...d1835c5ddb63eb0

Hey WGF,

Thx for the link. Really clarified some things for me. Good read. Now to play with the new info. Thx again.

You guys are killing me! Still no replacement card here, so I'm still dead in the water.

BTW, Jax, those scores rock!!!

Thx Arlie, it's a long and sometimes tedious process trying to find the 'sweet spot' that lies somewhere amongst the multiplier, FSB, memory and voltage on both the MB and video cards. I cleared the CMOS more than once. Mentally draining. Of course that doesn't take long with a shallow reservoir to begin with, lol.

Hope you get to making waves soon.

Arlie , have you seen this on the evga website? EVGA announcement

If this applies to you and you have already sent in the rma or cross shipping form I would call tech support and get it expedited. As for me, i'm kinda dead in the water until they get the KO Superclocked models in.

This is the score you haev to take for me, I can't OC right now due to an RMA coming from Asus.

ButvinJD/AI
Rig #1 Here

3dMark03
31147
http://service.futuremark.com/compare?2k3=4860429

3DMark05
12278
http://service.futuremark.com/compare?3dm05=2101187

3DMark06
7911
http://service.futuremark.com/compare?3dm06=375215

CrystalMark
http://crystalmark.info/CrystalMark/09en/r...ng.php?ID=61185
ALU: 16155
FPU: 19063
MEM: 11354
HDD: 7855

Total: 90190

A8N 32SLI Deluxe
AMD Athlon 64 4400 Dual Core
BFG 7900 GTX 512 sli
Seagate Barracuda 250gig
Corsair XMS TwinX 2048 (2x1gb)
Air Cooling

Roderick/AI

3D03
14838
http://service.futuremark.com/compare?2k3=4863852

3D05
6691
http://service.futuremark.com/compare?3dm05=2104254

3D06
2625
http://service.futuremark.com/compare?3dm06=378444

CM9
ALU 9162
FPU 10489
MEM 7747
HDD 11043
http://crystalmark.info/CrystalMark/09en/r...ng.php?ID=61425

FW06 total score
55176


A64 3500 @2400 Mhz
11x220
DDR PC3200
HDD's 2x Hitachi 80GB in Raid0
6600GT in SLI
Single core
Air

I realize that rosters are already posted, but here are my inhouse scores. This is close to the top, I'm reaching for tweaks at this point.

3d03: 32318
http://service.futuremark.com/compare?2k3=4866418

3D05: 14388
http://service.futuremark.com/compare?3dm05=2107051

3D06: 8763
http://service.futuremark.com/compare?3dm06=381285

CM9:
ALU: 22143
FPU: 24182
Mem: 12420
HDD: 29747 (28000)
http://crystalmark.info/CrystalMark/09en/r...ng.php?ID=61466

Total: 126,055

I was guessing 123K-124k! We'll take 126k though.