DFI LP UT P35 T2R LGA 775 Intel P35 ATX Intel Motherboard - Retail

http://www.newegg.com/Product/Product.asp?...N82E16813136037

Oh come on Merc, I have to send it back like today, it's brand new, didn't touch it.
Got a nice XFX 8800GTX XXX edition to go with it.
630 mhz core.

got a nice fully sleeved pc p&c 750 to go with it.

even throw in a pair of 74 gig raptors
come on you know you want it, it's a dfi with a super bios

ok $299 at the egg
http://www.newegg.com/Product/Product.asp?...N82E16813136037

$275 for you, that XFX is still worth bucs, $430 for it.
the 750 psu is $200 new, $140 for ya.

74 gig raptors are $129 new, sell ya the pair for $190

got a brand new cooler master stacker 830 evo case in black,
just has some finger prints on it, but it's gunna go back to amazon soon.
paid $258, $200 for ya, brand new in the box.

come on, go to the bank and treat yourself..

PM me on that GTX, I may be interested. I don't need a board. This Asus P5K is a perfect fit for the Q6600, I love the thing. Don't need Raptors and my PC P&C from you is going strong. But, that GTX has me interested.

Oh man, I've been looking at upgrading to a P35. Tempting, but I need to do a case mod before I go to a quad.

well you can use your cpu in your sig on that dfi until you mod your case.

it will give you some time to get use to tweaking it.

one e-mail from newegg says i have 7 days until my rma isn't valid.
today is the 7th day.
another says i have 14 days, so not sure what to do.

what makes this board so good with no SLI support?

wouldn't an sli board be faster then this with one card?

i do have a Core 2 Extreme QX6700 Quad-Core.
so that mobo and the above cpu with one 8800GTX would be better than SLI?

Probably wouldn't beat it but the P35 chipset is outstanding. Great memory throughput, great overclocker and loves the quad processors. Very stable and the Asus has almost no V-droop. Set 1.50 and the board boots at 1.473 and then stays pretty much there regardless of the load, maybe a slight droop to 1.469v. Makes O/Cing easy and also allows you to boot and run at the load voltage rather than running all the time at 1.50v because VDroop will take it down to 1.47v with a load. It is also a cooler running chip. Intel did a great job.


An SLI rig will do better on graphics, though, since two GTXes will always trump a single. So, in your case, I'd stick with SLI and RMA the DFI. You can always request your RMA number from The Egg and then see if you can sell the board in the next few days. They don't care if you never use the RMA number.

ok nevermind the PM i sent ya..

I have the 8800GTX folks.

Not just any old reference 8800GTX though.

http://i14.ebayimg.com/02/i/000/b5/28/b31c_3.JPG

http://i13.ebayimg.com/01/i/000/b5/28/b495_3.JPG

http://i8.ebayimg.com/04/i/000/b5/28/b54e_12.JPG


Now go and read my post on motherboard advice you PC geek you.

If I wasnt so far away, I'd snap that DFI p35 up in a heartbeat...

going to the ups drop off now..

Wait, I changed my mind!!! Only kidding mate. Let me know the shipping and I'll post to paypal, I have the account info already from previous transactions.

Hey Capn,

What stuff might you have left? I might be interested in one of the 74 G raptors and do you have another XFX 8800?

PM if you'd like.

Thanks,
Rick

Ok, give me a bit to get together, been in bed most of the week.

Thx

going to keep the two 74gig raptors for my tinker rig, but i have 150 gig raptors that are newer and weren't used much at all.

ahh my last XFX 8800GTX XXX Edition card, yeah it's for sale.